Every equipment that is put to use on a job site requires appropriate maintenance to help it function efficiently. The compressed air equipment is likely to stop working if it is overheating. Eventually, you will have to replace or repair your equipment. Furthermore, the overall organization will have to wind up the production if the compressor stops functioning by overheating. As the leading supplier of Ingersoll Rand diesel air compressor, we have listed the crucial parts to inspect if your air compressor is overheating.
Let’s check out the parts:
#1 You must examine the ambient temperature of the air compressor:
Ambient temperature is one of the vital things to check in compressed air equipment while it is overheating. The entire area around a compressed air equipment must be adequately insulated so that it will prevent the heat from entering in that space. You must observe the heat sources around air compressor carefully and discover if there is any method if a workshop can be amended. It will prevent the compressed air equipment from exposing to the heat source. You must keep the equipment in a coolest location of your facility to avoid this problem. It is essential to keep the air compressor far from windows at summer time so that direct sunlight cannot affect the equipment. Though such alterations are small but have a great effect on operating temperature of your compressed air equipment. There are important tips to make your compressor more efficient and enhance productivity of a job site.
#2 You must scrutinize the air ducts in the compressor:
Another essential part to examine in the air compressor is air duct. The air ducts in a compressor must be massive enough for providing sufficient ventilation. The HVAC system need to function in best manner for keeping the space conditioned if the ducts are too small. As per the power of HVAC system, it might be very difficult to condition your space properly with smaller air ducts. If in case, air ducts are substantial, it will be difficult for air to extend till the conditioned space due to improper velocity. You must see to it that the ducts are not blocked. It is advised to carry out the air duct cleaning services to clean once a year regularly. We provide top brands or air compressors such as 375 CFM diesel air compressor, Doosan portable compressors that you can select as per your needs.
#3 You must examine the oil in the compressor on regular basis:
There might be the case when air compressor does not have an adequate oil for functioning. Oil has the important part when it comes to cooling off the compressed air equipment. It is highly recommended to inspect the oil levels on regular basis. Varnishing of the oil also leads to immoderate friction in your equipment. All of the lubricants are located under the severe operating state that results in varnishing. It is advised to alter the oil persistently as per the operating conditions in which the compressed air equipment must function at. We also provide the used rotary screw air compressor for sale that you can choose as per your preferences.
#4 You must inspect the thermal valve:
The thermal valve can be imperfect in air compressor. It is highly recommended to alter the thermal valve well in advance to keep away from the time during which the compressor is unavailable for usage. You can also make a comparison in the new and old thermal valve to find out if there is a need to replace the old one.
Bottom Line:
The essential parts as listed above must be adequately examined if your compressor is overheating. If you are looking forward to buying the new compressed air equipment, then feel free to contact us, and our team of experts will guide you further.
The post Important parts to inspect if your air compressor is overheating appeared first on Swift Equipment Solutions.